Mindray DPM 1, Operator'S Manual

Page: 49 / 54

B-1
B
EMC
The equipment meets the requirements of IEC 60601-1-2.
NOTE
z
The equipment needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided below.
z
The equipment may be interfered with by other equipment, even if that other
equipment complies with CISPR emission requirements.
Table 1
Guidance and MINDRAY DS declaration
—
electromagnetic emissions
The equipment is intended for use in the electromagnetic environment specified below. The
customer or the user of the equipment should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic environment
—
guidance
RF Emissions
CISPR 11
Group 1 The equipment uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
CISPR 11
Class A
Harmonic
Emissions IEC
61000-3-2
Not applicable
Voltage
Fluctuations/
Flicker Emissions
IEC 61000-3-3
Not applicable
The equipment is suitable for use in all establishments
other than domestic and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.