Mindray DPM 1, Operator'S Manual

Page: 37 / 54

7-5
7.2.3 Data Area
The Data Area displays the data of the current ID. The left part of Data Area is Information
Area, and the right part is Patient Data Area.
„
Information Area
It displays the patient Name, Sex, Age, and Doctor etc.
„
Patient Data Area
It displays the value of measured SpO2, PR, the corresponding Check Record and Save
Time of each measurement.
The content in the Information Area can’t be directly inputted or changed. Please select
<Patient Information> under the <Setup> menu, or click the shortcut icon.
NOTE
z
The data displayed as “---” is invalid.
z
The "(ADD)" appearing beside the check record number is to indicate that the
data thereafter are additional ones to this ID.
7.3 Functions
Before operate the function hereinafter, please first connect DPM1 with your PC (Refer to
3.5 Connect Computer ), and then double click the shortcut icon on the desktop to run the
PMS software.
7.3.1 Data Output
PMS software can output the data stored in DPM1 to your PC.
1. Select <Data Output> under the <Operation> menu to start data outputting as shown
below. During outputting, you can click exit to cancel the operation.
Figure 7-6
2. When data outputting is finished, the following dialog box will pop up.