Mindray BP10 NIBP Module, Operator'S Manual

Page: 64 / 100

Introduction Cleaning and Disinfecting
9 - 2 BP10 Operator’s Manual
9.1 Introduction
Only use the substances approved by Mindray and methods listed in this chapter to
clean or disinfect your device. Our warranty does not cover damage caused by
unapproved substances or methods.
Mindray makes no claims regarding the efficacy of the listed chemicals or methods as a
means for controlling infection. For the method to control infection, consult your
hospital’s Infection Control Officer or Epidemiologist.
9.2 Safety
WARNING
•
The responsible hospital or institution shall carry out all cleaning and
disinfection procedures specified in this chapter.
•
Be sure to shut down the system before cleaning the equipment.
•
Non-medical equipment does not provide the same level of protection
against electrical shock. Do not touch the patient and any part of non-
medical equipment at the same time. Some examples of non-medical
equipment are laser printers and nonmedical computers.
•
Avoid use of cleaners, materials or chemicals that may damage device
surfaces, labels, or cause equipment failures.
•
Keep your equipment and accessories free of dust and dirt. To avoid damage
to the equipment, follow these guidelines:
◆
Always dilute according to the manufacturer’s instructions or use lowest
possible concentration.
◆
Do not immerse any part of the device into liquid. Do not pour liquid onto
the equipment or accessories.
◆
Do not allow liquid to enter the case and the device interior.
•
Never use abrasive materials (such as steel wool or silver polish), or erosive
cleaners (such as acetone or acetone-based cleaners).
•
If liquid has accidentally entered the system or its parts, shut down the
system and have the device serviced by authorized service personnel.
•
Remove the equipment from use if liquid is spilled on the equipment or
accessories. Contact your service personnel.
•
When cleaning, avoid the NIBP connector and other connectors.