Mindray BP10 NIBP Module, Operator'S Manual

Page: 13 / 100

Safety Safety Information
BP10 Operator’s Manual 1 - 3
1.1.1 Warnings
WARNING
•
BP10 is intended to be used for a single patient at a time.
•
BP10 must be operated by medical personnel in hospitals or medical
institutions.
•
To avoid explosion hazard, do not use the equipment in the presence of
oxygen-rich atmospheres, flammable anesthetics, or other flammable
agents.
•
Do not use this equipment in conjunction with Electro Surgical Unit (ESU).
•
Before putting the system into operation, the operator must verify that the
equipment and accessories are in correct working order and operating
condition.
•
Do not come into contact with the patient during defibrillation. Otherwise
serious injury or death could result.
•
Do not touch the patient and live parts simultaneously.
•
Do not open the equipment housings. All servicing and future upgrades must
be carried out by trained and authorized personnel.
•
The physiological data displayed on the system are for reference only and
cannot be directly used for diagnostic interpretation.
•
Only use parts and accessories specified in this manual.
•
Route, wrap and secure the hose to avoid inadvertent disconnection,
stumbling and entanglement.
1.1.2 Caution
s
CAUTION
•
Do not let BP10 directly touch the patient’s skin when the device is on. The
device temperature rises when the device is on. If the device contacts the
patient’s skin for a long time, skin burns may occur.
•
When disposing of the packaging material, be sure to observe the applicable
waste control regulations and keep it out of children’s reach.
•
Magnetic and electrical fields are capable of interfering with the proper
performance of the equipment. For this reason make sure that all external
equipment operated in the vicinity of the equipment comply with the
relevant EMC requirements. Mobile phone, X-ray equipment or MRI
equipment are a possible source of interference as they may emit higher
levels of electromagnetic radiation.