Mindray BP10 NIBP Module Operator'S Manual Download Page 37

Page: 37 / 100

Configuring BP10

Restoring Factory Defaults

BP10 Operator’s Manual

4 - 5

NOTE

•

Do not set the same device name for BP10s.

4.9

Restoring Factory Defaults

You are allowed to re-establish the first time power-up settings and change the original
user and device configurations to factory defaults.

To restore the factory defaults, follow this procedure:

In the main menu, select

System.

Select

Maintenance

, and enter the maintenance passcode.

In the

Maintenance

menu, select

Restore Factory Defaults

The following message shows: Are you sure you want to restore factory default
settings? All history data will be cleared.

Select

Yes

4.10

Service Menu

The

Service

menu only allows an authorized service personnel to access.

Summary of Contents for BP10 NIBP Module





































































































Search results

Summary of Contents for BP10 NIBP Module

Reviews:

Related manuals for BP10 NIBP Module

Brands by name

Popular brands

Mindray BP10 NIBP Module, Operator'S Manual

Search results

Summary of Contents for BP10 NIBP Module

Reviews:

Related manuals for BP10 NIBP Module

Brands by name

Popular brands