Setting the Alarm Volume and Beep Volume
Operation
3 - 16
Accutorr Plus™ Operating Instructions
3.7
Setting the Alarm Volume and Beep Volume
The LCD on the Accutorr Plus advanced models is used to display the Trend List as described
in section 3.6. It is also used to display a menu which is used to set the alarm volume and the
SpO
2
beep volume. The MENU key (8), the LCD Up and Down Arrow keys (9 & 10), and the
SELECT key (11) are used to set these volumes. The User Configuration mode can be used to
set custom defaults for the alarm volume and beep volume. See section 3.15, User
Configuration for details.
1.
Press the
MENU
key (8) to display the menu. The menu is shown in figure 3-4. The
alarm volume is initially highlighted when the menu is displayed. The highlighting
indicates this item can be changed.
2.
Press the
LCD
Up and Down Arrow
keys (9 & 10) to change the current selection for
the alarm volume. The selections are: OFF, 1, 2, 3, 4, and 5 with 5 being the loudest.
3.
Press the
SELECT
key (11) to move the highlighting to SpO
2
beep volume.
4.
Press the
LCD
Up and Down Arrow
keys (9 & 10) to change the current selection for
the SpO
2
volume. The selections are: OFF, 1, 2, 3, 4, and 5 with 5 being the loudest.
5.
Press the
MENU
key (8) again to exit the menu and return to the Trend screen.
NOTE:
Any changes made to the alarm volume or the SpO
2
volume will be erased when the unit is turned off and then
back on again. Also, any changes made (except off) will
restore and enable the alarm tone, regardless of prior mute
condition.
FIGURE 3-4
Menu
3
3
Alarm
Volume
SpO
2
Beep
Volume
