Accutorr Plus™ Operating Instructions
2 - 5
Controls and Indicators
Front Panel
13. PRINT INDICATOR
This indicator is illuminated when continuous printing of measurements is selected.
14. DEFAULTS KEY
Press and hold this key (2 single beep tones, approx. 3 seconds) to reset all parameters back
to the hospital default settings. This includes alarms, inflation pressure, interval, etc. When in
the process of making a change to a setting, you can return to the original setting by
momentarily pressing this key. To enter the User Configuration, press and hold this key (1
beep tone), while turning the unit on. See section 3.15 for details on default settings and
User Configuration.
15. SpO
2
Connector (optional feature with the Accutorr Plus advanced
models)
This connector is used to attach SpO
2
sensors.
16. AC Power Indicator
This green LED illuminates whenever AC power is applied to the unit.
17. Battery Indicator
This green LED illuminates whenever the unit is operating on battery power. The LED will flash
when the battery requires charging. When the LED begins flashing, at least 10 minutes
minimum of battery time remain on the Accutorr Plus.
18. NIBP Connector
This connector is used to attach specified NIBP hoses.
19. ON/STANDBY KEY
This key is used to activate the unit, enabling it to begin taking measurements. The unit does
not have to be “ON” for the internal battery to charge. However, the unit does need to be
plugged into an AC receptacle for the battery to be charging.
20. Memory Full Indicator
This LED indicator flashes when 80 - 99 of the 100 available entries of trend are used. This
LED is on continuously when 100 are used. Delete measurements manually using the DELETE
INFO. key or the unit will automatically delete the oldest measurement for the current patient.
NOTE:
The unit will also automatically delete data that is 24 hours
old.
21. DELETE INFO. KEY
Press the
DATA SCAN
key to enable the Delete Info. key (Accutorr Plus basic model only).
Once enabled, press and hold this key (1 beep tone, approx. 3 seconds) to delete the most
recent reading when it is displayed. When displaying any measurement, press and hold this
key (2 beep tones, approx. 6 seconds) to delete all information for the currently selected
patient. Press and hold at power up to delete all information for all patients.
