MIMAKI Tx300P-1800B, Operation Manual, Page: 89 / 144

This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink cartridges etc.
Maintenance ................................................. 4-2
Precautions for Maintenance ...................... 4-2
About Cleaning Solution.............................. 4-2
Cleaning the Exterior Surfaces ................... 4-2
Cleaning the peeling roller .......................... 4-2
Cleaning the Belt Correction Unit ................ 4-3
About MAINTENANCE MENU ...................... 4-4
MAINTENANCE MENUs at-a-glance .......... 4-5
Maintaining the Capping Station ................... 4-6
Cleaning the Wiper and Cap ....................... 4-6
Washing the Head Nozzle ........................... 4-7
Washing the Ink Discharge Passage .......... 4-9
When the Machine Is Not Used for a
Long Time ................................................. 4-10
Cleaning the Ink Head and the Area
around It ...................................................... 4-13
Nozzle Recovery Function .............................. 4-14
Reset the set value ................................... 4-15
Check the condition for which nozzle
recovery cannot be performed .................. 4-15
Enabling or disabling nozzle recovery
during a test print ...................................... 4-16
Automatic Maintenance Function ................4-16
Setting the Refreshing Intervals ................. 4-16
Setting the Tube Wash Intervals ................ 4-17
Setting the Cleaning Intervals and Type .... 4-17
Suspend the nozzle cleaning..................... 4-17
Fill up Ink .....................................................4-18
Replacing consumables ..............................4-18
Replacing the wiper ................................... 4-18
If a Waste Ink Tank Confirmation
Message Appears ...................................... 4-19
Replace the waste ink tank with another ... 4-19
Replacing the Water .................................. 4-20
Wash Unit Maintenance ..............................4-21
Cleaning the Belt Wash Unit ...................... 4-21
Absorb Roller Cleaning .............................. 4-22
Reapplying Adhesive ..................................4-24
Peeling Off Adhesive ................................. 4-24
Applying Adhesive ..................................... 4-26
Cleaning the washing tray and brush ........ 4-29
Feeding Belt Cleaning .................................4-30
Peeling Sensor Cleaning .............................4-31
Resetting the Counter .................................4-31
Chapter 4
Maintenance