MIMAKI Tx300P-1800B, Operation Manual, Page: 71 / 144

3-11
1
2
3
4
5
6
Chapter 3 Setup
Setting Interval wiping
When the set time has passed, nozzle face of the head is
cleaned automatically to remove ink droplets on the
nozzle face.
In case that deflection, nozzle missing, or symptom which
ink droplets fall down occurred, set the interval between
each operation shorter.
1
Press
(MENU)
in LOCAL.
2
Press to select SETUP 1 to 4,
and press the key.
• SETUP MENU will be displayed.
3
Press (<<) .
4
Press to select “INTERVAL
WIPING”, and press the key.
5
Press to set intervals.
• Set Value : 3 to 255 Minutes, OFF
• When [OFF] is set, periodical wiping is not
executed.
6
Press the key.
7
Press the key several times to
end the setting.
Setting External heater
Used to set external heater to ON/OFF.
1
Press
(MENU)
in LOCAL.
2
Press to select SETUP 1 to 4,
and press the key.
• SETUP MENU will be displayed.
3
Press
(<<)
.
4
Press to select “EXTERNAL
HEATER”, and press the key.
5
Press to select set value.
• Set Value: ON/OFF
6
Press the key.
7
Press the key several times to
end the setting.
Setting for Improving Image Quality by
Changing Media-feeding Rate (BELT COMP.)
Setting the BELT COMP. to ON allows for improved print
quality.
Set belt comp. to ON at times when you are concerned
about unevenness during printing or seam joint of the belt.
1
Press
(MENU)
in LOCAL.
2
Press to select SETUP 1 to 4,
and press the key.
• SETUP MENU will be displayed.
3
Press
(<<)
.
4
Press to select “BELT COMP.”,
and press the key.
5
Press to select set value.
• Set Value: ON/OFF
6
Press the key.
7
Press the key several times to
end the setting.
Setting Belt Wash
Using the belt wash feature makes it possible to remove
ink stains which go through the media and appear on the
feeding belt.
1
Press
(MENU)
in LOCAL.
2
Press to select SETUP 1 to 4,
and press the key.
• SETUP MENU will be displayed.
3
Press
(<<)
.
4
Press to select “BELT WASH”,
and press the key.
5
Press to select set value.
• Set Value: ON/OFF
• When you change setting of the belt correction,
set the feeding correction. ( P.2-27)
• The belt wash function only activates during
feeding belt operation.
• The best wash function will not operate, even
when set to ON, if the feeding belt is not in
operation.
• Because the absorb roller may be deformed, when
setting in “OFF”, make sure to remove it in
advance. (
P.4-22)