MIMAKI Tx300P-1800B, Operation Manual, Page: 25 / 144

Chapter 1 Before Use
1-11
1
2
2
2
5
6
(2) Tear off the seal on the connector of the 2L
ink pack.
(3) Put the 2L ink pack facing the connector
down, and close the 2L eco-case.
4
Attach the 2L eco-case to the base.
• Ink is supplied to the printer connecting to the 2L
eco-case.
• After 1 or 2 minutes, EMPTY lamp on the
connected printer goes out.
• Be careful of the IC chip direction. If it is set in the
wrong direction, ink is not supplied properly.
• When putting the 2L ink pack, shape the pack
referring to the label in the 2L eco-case. If
unshaped, you may not use up the ink.
• Before closing the 2L eco-case, make sure the
connector of the ink pack is placed on the groove
part of the 2L eco-case. If it is not placed on the
groove, it may not supply ink.
OK
Seal remaining
No Good
groove
part
• Push the 2L eco-case all the way in. If not, it may
not supply ink.