2
3
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
WARNING
READ ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock, fi re and/or
serious injury. The term "power tool" in all of the warnings listed below refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES — FOR ALL POWER TOOLS
1.
Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
2.
Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of fl ammable liquids, gases,
or dust.
Power tools create sparks which
may ignite the dust or fumes.
3.
Keep children and bystanders away
while operating a power tool.
Distrac-
tions can cause you to lose control.
4.
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
5.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
6.
Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric
shock.
7.
Do not abuse the cord. Never use the
cord for carrying, pulling, or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges, or mov-
ing parts.
Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool out-
doors, use an extension cord suitable
for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
9.
Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the infl uence of drugs, alcohol
or medication.
A moment of inattention
while operating power tools may result
in serious personal injury.
10.
Use safety equipment. Always wear
eye protection.
Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
11.
Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in.
Carrying tools with your fi nger on
the switch or plugging in power tools that
have the switch on invites accidents.
12.
Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
13.
Do not overreach. Keep proper foot-
ing and balance at all times.
This
enables better control of the power tool
in unexpected situations.
14.
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewellery, or long
hair can be caught in moving parts.
15.
If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used.
Use of these de-
vices can reduce dust-related hazards.
POWER TOOL USE AND CARE
16.
Do not force the power tool. Use the
correct power tool for your applica-
tion.
The correct power tool will do the
job better and safer at the rate for which
it was designed.
17.
Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
18.
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools.
Such preven-
tive safety measures reduce the risk of
starting the tool accidentally.
19.
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tools or
these instructions to operate power
tools.
Power tools are dangerous in the
hands of untrained users.
20.
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
21.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
22.
Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
SERVICE
23.
Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool
is maintained.
SPECIFIC SAFETY RULES
1.
Always use proper guard with grind-
ing wheel.
A guard protects operator
from broken wheel fragments.
2.
Accessories must be rated for at least
the speed recommended on the tool
warning label.
Wheels and other acces-
sories running over rated speed can fl y
apart and cause injury.
3.
Make sure all wheel fl anges and other
mounting hardware are in good con-
dition and are always used properly.
Defective or missing parts may dam-
age the wheels and other accessories.
Always use mounting hardware supplied
with the tool.
4.
Hold tools by insulated gripping sur-
faces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord.
Con-
tact with a “live” wire will make exposed
metal parts of the tool “live” and shock
the operator.
5.
Keep hands away from all cutting
edges and moving parts
.
6.
Maintain labels and nameplates.
These carry important information.
If unreadable or missing, contact a
MILWAUKEE
service facility for a free
replacement.
7.
WARNING:
Some dust created by
power sanding, sawing, grinding, drill-
ing, and other construction activities
contains chemicals known to cause
cancer, birth defects or other reproduc-
tive harm. Some examples of these
chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement
and other masonry products, and
•
arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well ven-
tilated area, and work with approved
safety equipment, such as those dust
masks that are specially designed to
fi lter out microscopic particles.
