Professional tool
Pneumatic Grinder
Model: MYG-70
The end tool in the drawing is not included with the tool.
[Specifications]
Model
MYG-70
Maximum operating pressure
MPa
0.6
Air consumption (No load)
m
3
/min
0.70
Rated speed (No load)
min
-1
7600
Depressed Center Grinding Wheel outer diameter
mm (inch)
180 (7")
Depressed Center Grinding Wheel hole diameter
mm (inch)
22.2 (7/8")
Mass (weight)
kg
2.5
Sound pressure level *1
dB (A)
92
Sound power level *1
dB (A)
103
Vibration level *2
m/s
2
3.2 (Main unit)
8.2 (Handle)
Thread size of Air Inlet
Rc 3/8
*1
Based on the ISO15744 measurement standard.
*2 Based on the 3 axes combined value measurement standard of the
ISO28927-1 of the hand-held tool frequency correction vibration
acceleration effective value.
Please read manual carefully before you attempt to use your tool so that you may use it
properly and safely.
Keep the manual handy - so you can use it whenever necessary.
• Due to continuous product development/improvement, the specifications and configurations in this
document are subject to change without prior notice.
TQ15277-0 08/2017
INSTRUCTION
MANUAL
Manufactured by.
NITTO KOHKI CO., LTD.
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
(Original Instructions)
TQ15277-0̲MYG-70̲en.indb i
2017/08/07 13:23:44
