page 3
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord.
Contact with a live wire will make exposed metal parts of the tool live and shock the operator.
2.
Wear ear protectors when using the tool for extended periods.
Prolonged exposure to high intensity noise can cause hearing loss.
3.
Keep hands away from all cutting edges and moving parts.
4.
Maintain labels and nameplates.
These carry important information. If unreadable or missing, contact a
MILWAUKEE
service facility for a free
replacement.
5.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
FUNCTIONAL DESCRIPTION
SPECIFIC SAFETY RULES HAMMERS
1. Chuck
2. Hammer-drill selector collar
3. Nameplate
4. Forward/reverse switch
5. Cord
6. Trigger lock
7. Trigger
8. Side handle
9. Depth gauge
10. Dust shield
9
1
10
3
4
5
6
7
8
2
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
No Load Revolutions per
Minute (RPM)
Specifications
Cat.
No.
5391-1
5392-1
Twist Drill
Bits
3/8"
3/8"
Watts
550
550
Blows per
Minute
0 - 50,000
0 - 50,000
No Load
RPM
0 - 2,500
0 - 2,500
Volts
AC
120
120
Flat
Boring
Bits
3/4"
3/4"
Carbide
Tipped
Bits
9/16"
9/16"
Screw
Fasten-
e r s
3/16"
3/16"
In Steel
In
Wood
In Concrete or
Masonry
Capacities
All manuals and user guides at all-guides.com