Miller Maxstar 200 DX, Owner'S Manual

Page: 48 / 94

OM-2226 Page 42
C.
Changing Programmable TIG Start Amperage
1 Amperage Switch Pad
2 Encoder Control
3 Amps Meter
To adjust TIG Start Amperage proceed as
follows:
Press Amperage switch pad. Switch pad
LED turns on, and meter A LED turns on.
The current Start Amperage is displayed on
the amps meter, and can be adjusted (see
Section 5-13) by turning the Encoder con-
trol.
To change Start Time, proceed to Section
D.
2
StA
20
3
Current (A)
Start
Amperage
1
D. Changing Programmable Start Time
1 Amperage Switch Pad
2 Encoder Control
3 Amps Meter
To adjust Programmable Start Time pro-
ceed as follows:
Press Amperage switch pad, and meter S
LED turns on. The current Start Time is dis-
played in milliseconds on the amps meter,
and can be adjusted by turning the Encoder
control (see Section 5-13).
To change Start Slope Time, proceed to
Section E.
3
2
Stt
10
Current (A)
Start Time
1