Miller Auto-Axcess E Digital, Owner'S Manual

Page: 88 / 164

OM-257 675 Page 82
Table 9-5. Assembly Object (04
HEX
− 2 Instances) (Continued)
Instance
Attribute
ID
Name CIP Data Type Data Value Access Rule
254 (0xFE) Input only heartbeat
1
Heartbeat 0 N/A
255 (0xFF) Listen only heartbeat
2
Heartbeat 0 N/A
Unused (n) Configuration
3
1. This instance allows clients (PLCs) to monitor input data without providing output data.
2. This instance allows clients (PLCs) to monitor input data without providing output data. To use this connection type, an owning connection
must exist from a second client and the configuration of the connection must match exactly.
3. Configuration data is not required, but it must match if supplied. Contents of the configuration instance are yet to be determined.
Table 9-6. Assembly Object’s Common Services
Service Code
Implemented For
Service Name
Class Level Instance Level
0E
Hex
Yes Yes Get_Attribute_Single
10
Hex
Yes Yes Set_Attribute_Single
Output Flags Input Flags
Bit Names Bit Names
15 Reserved (0) 15 Reserved (0)
14 Reserved (0) 14 Reserved (0)
13 Reserved (0) 13 Reserved (0)
12 Reserved (0) 12 Reserved (0)
11 Touch Sense Command 11 Touch Sense Active
10 Reserved (0) 10 Weld State Status
9 Contactor on/off 9 Contactor Status
8 Reserved (0) 8 Error Active
7 Reserved (0) 7 Reserved (0)
6 Reserved (0) 6 Reserved (0)
5 Reserved (0) 5 Reserved (0)
4 Reserved (0) 4 Touched
3 Gas on/off 3 Gas Status (on/off)
2 Motor Forward on/off 2 Motor Forward Status (on/off)
1 Motor Retract on/off 1 Motor Retract Status (on/off)
0 Reserved (0) 0 Arc Detect