Miller Auto-Axcess E Digital, Owner'S Manual

Page: 19 / 164

E300
Spec
OM-257 675 Page 13
SECTION 4 − SPECIFICATIONS FOR
AUTO-AXCESS E 300 DIGITAL
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the front. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Power Source Functionality
This power source is designed with the necessary functionality to integrate into a robot controller or PIC (Peripheral Interface Controller) that operate
using either DeviceNet or Ethernet communications.
4-3. Unit Specifications
Input
Power
Rated
Welding
Output
Voltage
Range
Wire Feed
Speed
Range**
Wire
Diameter
Range
Max
Open
Circuit
Voltage
DC
Amperes Input At Rated Load Output 60 Hz,
Single-Phase/Three-Phase
Input
kVA
Input
KW
208 V 230 V 380V 400V 460 V 575 V
Single
Phase
175 A @
22.8 V
DC,
100%
Duty
Cycle
10-44
Standard:
50-1400
ipm
(1.3-35.6
mpm)
.035-.062 in.
(0.8-1.6
mm)
80
25.3
(0-1A*)
23.0
(0-1A*)
13.5
(0-1A*)
12.8
(0-1A*)
10.9
(0-1A*)
8.6
(0-1A*)
5.3
(0.2*)
4.9
(0.04*)
Three
Phase
225 A @
25.3 V
DC,
100%
Duty
Cycle
19.9
(0-1A*)
17.8
(0-1A*)
10.9
(0-1A*)
10.3
(0-1A*)
9.0
(0-1A*)
7.3
(0-1A*)
7.1
(0.2*)
6.8
(0.04*)
*While idling; Input amperage fluctuates while idling and is always less than one Ampere. Use one Ampere for power efficiency calculations.
**Wire feed speed ranges are for GMAW welding. While pulse welding, wire feed speed ranges may be more limited.
4-4. Dimensions And Weight
Hole Layout Dimensions
A
B
C
E
D
21-3/4 in.
(553 mm)
26-1/2 in.
(673 mm)
Ref. 250 016-C
17-3/32 in.
(434 mm)
A 17-3/32 in. (434 mm)
B 17-3/8 in. (441 mm)
C 19-3/32 in. (485 mm)
D 16-3/32 in. (409 mm)
E 1/2 in. (13 mm)
Weight
117 lb (53 kg) Net
139 lb (63 kg) Ship