Installation and connection
99
Levelling the washer-dryer
The washer-dryer must stand perfectly
level on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
The appliance must not be
installed behind a lockable door, a
sliding door or a door with a hinge on
the opposite side to that of the
tumble dryer, in such a way that a full
opening of the tumble dryer door is
restricted.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the washer-dryer is
delivered.
Using the spanner supplied, turn
counter nut
2
in a clockwise direction.
Then turn counter nut
2
together with
foot
1
to unscrew.
Use a spirit level to check the
washer-dryer is standing level.
Hold foot
1
securely with a pipe
wrench. Turn counter nut
2
again
using the spanner supplied until it sits
firmly up against the housing.
All four counter nuts must sit
firmly up against the housing.
Otherwise there is a danger of the
machine moving about.
Please also check this for the feet
which did not need adjustment.
