Miele WTZH 730 WPM Operating Instructions Manual Download Page 108

Page: 108 / 124

Settings

108

Default settings can be altered to
adapt the washer-dryer to different
requirements. Settings can be altered
at any time.

Calling up settings

Before you begin, ensure the following:

– The washer-dryer is switched on.

– The standard display is showing.







2:59



1600



Touch the



and



sensors at the

same time.

The following will appear in the display:

Language 



You are now in the

settings

menu.

Selecting settings



Touch the





sensor until the

setting you want appears in the
display.

– The



sensor scrolls down the list.

– The



sensor scrolls up the list.



Touch the

sensor to select the

setting displayed.

Changing a setting



Touching the



sensor will call up the

different options for the setting.

The option which is selected will have
a tick



next to it.



When the option you want appears in
the display, touch the

sensor to

activate it.

Exiting a setting



Touch the





sensor repeatedly

until

Back 

appears in the display.



Touch the

sensor.

Summary of Contents for WTZH 730 WPM





























































































































Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands

Miele WTZH 730 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands