Washing
26
2. Selecting a programme
Switch the washer-dryer on
In order for the load display to function
correctly, the drum must be empty
before the washer-dryer is switched
on.
Press the
button.
The interior drum lighting will come on.
The drum lighting will go out
automatically after five minutes.
Selecting a programme
–
with the programme selector
Turn the programme selector to the
required programme.
The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.
–
with the programme selector set to
the “Further programmes” position
Turn the programme selector to the
Further programmes
setting.
The following appears in the display:
Denim
Touch the
or
sensor until the
programme you want appears in the
display.
Confirm the programme with the
OK
sensor.
The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.
The
Drying
indicator light must
not
be lit up, as this would mean that the
wash programme would be followed
immediately by the relevant drying
programme.
