Miele WTZH 730 WPM Operating Instructions Manual Download Page 55

Page: 55 / 124

Drying

2. Selecting a programme

Switch the washer-dryer on



Press the



button.

The interior drum lighting will come on.

The drum lighting will go out
automatically after five minutes.

Selecting a programme

- with the programme selector



Turn the programme selector to the
required programme.

The maximum load for the drying
programme selected will appear in the
display. This will then be replaced by
the standard display.

- with the programme selector turned
to the “Further programmes” position



Turn the programme selector to the

Further programmes

setting.

The following appears in the display:

Denim





Touch the





sensor until the

programme you want appears in the
display.



Confirm the programme with the

sensor.

The maximum load for the drying
programme selected will appear in the
display. This will then be replaced by
the standard display.

Summary of Contents for WTZH 730 WPM





























































































































Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands

Miele WTZH 730 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands