Cleaning and care
78
Cleaning the water inlet filter
The washer-dryer has a filter to protect
the water inlet valve. The filter in the
union in the open end of the inlet hose
should be checked approximately every
six months or more often if there are
frequent interruptions to the external
water supply.
First turn off the tap.
Unscrew the inlet hose from the tap.
Remove the rubber seal
1
from the
recess.
Hold the free end of the inlet hose
upside down. The plastic filter
2
will
fall out.
Clean the plastic filter.
Reassemble the filter and seal in the
reverse order and reconnect the
hose.
Turn on the tap and check that the
connection is watertight. If water
leaks, tighten the connection.
Never
forget to put the filter back in
place after cleaning.
