Miele WTZH 730 WPM Operating Instructions Manual Download Page 110

Page: 110 / 124

Settings

110

Changing the detergent type

Dosage amounts for Miele products
(e.g. UltraColor, Miele Fabric Softener)
are preset for water hardness
range I (



Deterg. type/amount





Touch the

sensor.

Compartment 





Touch the

sensor.





Miele UltraPhase 1



Select the detergent you want using
the



and



sensors and confirm

your selection with the

sensor.





Miele UltraColor

Dosage - 

105



Confirm the amount of detergent with
the

sensor or change the dosage

amount using the



and



sensors.



Settings for compartment  cancelled



Confirm the message with the

sensor.

Compartment 





Select

Compartment 2

using the



and



sensors and confirm your

selection with the

sensor.

No entry







Select the detergent you want using
the



and



sensors and confirm

your selection with the

sensor.





Miele fabric soft.

Dosage - 



Confirm the amount of detergent with
the

sensor or change the dosage

amount using the



and



sensors.

The electronics are set for the new
detergents.

Maintenance

The washer-dryer has a cleaning
programme for cleaning the TwinDos
system containers and the hoses
inside the machine.

Clean the TwinDos system if it is not
going to be used for a long time or
before changing the brand of liquid
detergent or fabric softener. See
“Cleaning and care - TwinDos
maintenance” for more details.

Summary of Contents for WTZH 730 WPM





























































































































Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands

Miele WTZH 730 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands