Miele WTZH 730 WPM Operating Instructions Manual Download Page 63

Page: 63 / 124

Drying

Sport shoes

Max. 2 pairs

Timed drying

Items

Sport shoes that are specified as suitable for tumble drying by their
manufacturer.

Note

Insoles should be removed and placed in the drum with the shoes.

Note

The drum does not rotate.

Silks

Max. load 1.0 kg*

8 min

Items

Silk garments which are suitable for drying in a tumble dryer, e.g.
blouses and shirts.

Notes

– For reduced creasing.

– Items are not dried completely in this programme.

– Remove garments as soon as the programme has finished.

Down Items

Max. load 2.5 kg*

Timed drying

Items

Jackets, sleeping bags, pillows and other down-filled items that are
suitable for tumble drying.

Note

Check the items as you are drying them to find the optimum time.

Pillows

2 pillows (40 x 80 cm) or 1 pillow (80 x 80 cm)

Timed drying

Items

Pillows with synthetic filling that are suitable for tumble drying.

Note

Pillows can still feel damp after being dried. You can use this
programme several times until the pillow feels dry.

Weight of dry laundry

1, 2

See the following pages

Summary of Contents for WTZH 730 WPM





























































































































Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands

Miele WTZH 730 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Related manuals for WTZH 730 WPM

Brands by name

Popular brands