background image

Washing

29

Selecting the temperature

You can alter the preset temperature
of a wash programme.

Press the 

Temperature

 button.

The following will appear in the display:

Temperature

°C

60

Set the temperature you want with
the 

 and 

 sensors and confirm

your selection with the 

OK

 sensor.

Selecting the spin speed

You can alter the preset spin speed of
a wash programme.

Press the 

Spin speed

 button.

The following will appear in the display:

Spin speed

rpm

1600

Set the spin speed you want with the

 and 

 sensors and confirm your

selection with the 

OK

 sensor.

Selecting options

You can select options to augment the
wash programmes.

Use the 

ProgrammeManager

Stains

or 

Further options

 buttons for

selecting the options you want.

The indicator light in the button will
come on.

You can only select options which are
compatible with the wash programme
being used (see “Washing - Options”).

Selecting Delay start

You can use Delay start to set the start
time for a programme.

Select a delay start time if required.

Please see “Delay start” for more
information.

Summary of Contents for WTZH 730 WPM





























































































































Reviews: