Miele WTZH 730 WPM Operating Instructions Manual Download Page 116

Page: 116 / 124

Settings

116

Miele@home

The

Miele@home

setting is only visible

when the Wi-Fi module is fitted.

Miele@mobile App

You can download the Miele@mobile
App from the Apple App Store

or the

Google Play Store™ free of charge (only
functional in selected countries).

After installing the Miele@mobile App
on a mobile device, you can do the
following, depending on your appliance:

– Operate your appliance remotely

– Call up information on the operating

status of your appliance

– Call up information on the

programme sequence of your
appliance

– Set up a Miele@home network with

other Wi-Fi enabled Miele appliances

Connecting the washer-dryer to your
Wi-Fi network

Make sure there is sufficient signal
strength for your Wi-Fi network
where the washer-dryer is installed.

The XKM 3100 W module must be
fitted.

There are several ways of connecting
your washer-dryer to your Wi-Fi
network.

1. Connect via the Miele@mobile App

The Miele@mobile App can be used to
connect to your network.



Install the Miele@mobile App on your
mobile device.



Follow the instructions in the App as
well as the fitting and installation
instructions supplied with the XKM
3100 W module.

To log in you will need:

1. Your Wi-Fi network password

2. The password for your washer-dryer

Summary of Contents for WTZH 730 WPM





























































































































Search results

Summary of Contents for WTZH 730 WPM

Reviews:

Miele WTZH 730 WPM, Operating Instructions Manual, Page: 116 / 124

Search results

Summary of Contents for WTZH 730 WPM

Reviews: