Problem solving guide
84
General problems with the washer-dryer
Problem
Cause and remedy
At the end of the pro-
gramme there is still li-
quid in the capsule.
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
Clean the small pipe.
This is not a fault. For technical reasons a small
amount of water will remain in the capsule.
There is water next to
the capsule in the fabric
conditioner compart-
ment.
The Cap
sensor was not activated or an empty
capsule was not removed at the end of the last pro-
gramme.
Make sure that you remember to activate the Cap
sensor the next time you insert a capsule.
Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
Clean the small pipe.
The laundry has not
been spun properly and
the laundry is still wet.
The machine detected an imbalance during the final
spin cycle and reduced the spin speed automatically.
Include both large and small items in the load as
this will give better distribution during spinning.
The display is dark.
The display has switched off automatically to save
energy (Standby mode).
Press a button. Standby comes to an end.
The time left duration in
the display fluctuates.
The countdown time adapts constantly to the cur-
rent washing and drying process.
