Settings
113
Water plus
You can increase the amount of water
used in the wash programmes.
Options
- Water plus (factory default)
More water is used in the wash and
rinse stages.
- Extra rinse
An additional rinse is carried out.
- Water plus and Extra rinse
The water level is increased in the
wash and rinse stages and an extra
rinse is carried out.
Water plus level
There are four different water levels
which can be selected with Water
plus.
Level
- Normal (Factory default setting)
- Plus
- Plus
- Plus
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy suffer-
ers as it achieves an excellent rinse res-
ult. Water consumption will increase.
Factory default setting: the maximum
rinse level setting is switched off.
Suds cooling
When this is activated, additional wa-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem-
perature of 70 °C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
- where drainage pipes do not comply
with DIN 1986.
Factory default setting: Suds cooling is
switched off.
