Miele WTH 120 WPM Operating Instructions Manual Download

Page: 71 / 124

Changing the programme sequence

Adding or removing laundry

You can add or remove items during the
first few minutes after the programme
has started.



Press the

Start/Stop

button.

The following will appear in the display:

Cancel programme





Scroll through the list with the





sensors to:

Add laundry





Touch the

sensor.

If this message does not appear in the
display then it is no longer possible to
add or remove items of laundry.

The programme will stop and the door
will unlock.



Pull open the door.



Add or remove items.



Close the door.



Press the

Start/Stop

button.

The programme continues.

Please note:

Once a programme has started, the
washer-dryer cannot recognise any
adjustment to the load.

For this reason, if laundry is added or
removed after the start of a pro-
gramme, the machine will always
complete the programme cycle as-
suming a full load.

Summary of Contents for WTH 120 WPM





























































































































Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands

Miele WTH 120 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands