Settings
117
Remote control
The
Remote control
setting is only vis-
ible when the WiFi module is fitted and
signed on.
Once the Miele@mobile App has been
installed on your mobile device, you
can check the status of your washer-
dryer from anywhere and start it re-
motely.
The
Remote control
setting has to be
switched on if you want to start your
washer-dryer with your mobile device.
If
Remote control
is not switched on the
App can cause the programme to be
cancelled.
Use the “Delay start” button to set a
time frame in which you want the
washer-dryer to start and start the delay
period (see “Delay start”).
The washer-dryer will then start during
this period once it has received a signal
from you.
If it has not received a signal from you
by the latest start time set, the washer-
dryer will start automatically.
Remote control is switched off by de-
fault.
SmartGrid
The
SmartGrid
setting is only visible
when the WiFi module is fitted and
signed on.
This function can be used for starting
your washer-dryer automatically at a
time when your energy costs are most
economical.
Activating
SmartGrid
, gives the
Delay
start
button a new function.
Set
SmartStart
with the “Delay start”
button.
The washer-dryer will then start within
the timeframe that you have specified
when it receives a signal from your en-
ergy supplier.
If it has not received a signal from your
energy supplier by the latest start time
set, the washer-dryer will start automat-
ically.
The
SmartGrid
function is switched off
by default.
SmartStart
If you have activated the
SmartGrid
function in Settings, instead of
Start in
,
SmartStart
will appear in the display
when you press the Delay start button.
You can define a period (from
15 minutes to 24 hours), in which the
wash programme must be started. The
procedure for setting this is the same as
for setting the time for Delay start.
