Settings
116
The password for your washer-dryer
consists of the last nine digits on the
serial number. This can be found on the
machine's data plate.
2. Connect via WPS
Pre-requisites:
- You must have a WPS compatible
router.
- The WiFi module must be inserted
in the module shaft.
- The washer-dryer must be
switched on.
Follow the fitting and installation in-
structions supplied with the XKM
3100 W module.
If the connection fails, you have prob-
ably not connected WPS to your router
quickly enough. Repeat the steps
above.
Tip:
If your WiFi router does not support
WPS, please connect via the
Miele@home App.
Module settings
We recommend connecting the washer-
dryer to your WiFi network with the help
of the Miele@mobile app or via WPS. If
you would rather set up the connection
to your router yourself, or you have a
special network configuration, you can
enter the relevant settings if you have
the necessary technical knowledge.
Module-Info
Displays information about the WiFi
module.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can re-
store the factory default settings on
your WiFi module. Any settings that do
not affect Miele@home will remain un-
changed.
Select
Restart with default
and confirm
with
OK
.
The network configuration should be re-
set whenever a washer-dryer is being
disposed of or sold, or if a used
washer-dryer is being put into opera-
tion. This is the only way to ensure that
all personal data has been removed and
the previous owner will no longer be
able to access the washer-dryer.
System settings
This function is reserved for the manual
integration of your appliance into your
network by a Miele service technician.
