Miele WTH 120 WPM Operating Instructions Manual Download

Page: 25 / 124

WASHING

2. Select a programme

Switch the washer-dryer on



Press the



button.

The interior drum lighting will come on.

The drum lighting will go out automat-
ically after five minutes.

Select a programme

with the programme selector dial



Turn the programme selector to the
required programme.

The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.

with the programme selector dial
set to the “Further programmes”
position



Turn the programme selector to

Fur-

ther programmes

The following will appear in the display:

Denim





Touch the





sensor until the

programme you want appears in the
display.



Confirm the programme with the

sensor.

The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.

The

Drying

indicator light must

not

be lit up, as this would mean that the
washing programme would be fol-
lowed immediately by the relevant
drying programme.

Summary of Contents for WTH 120 WPM





























































































































Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands

Miele WTH 120 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands