Installation
*INSTALLATION*
97
Aligning the washer-dryer
The washer-dryer must stand perfectly
level on all four feet to ensure safe and
proper operation.
Incorrect installation may increase elec-
tricity and water consumption and may
cause the washer-dryer to move about.
Screwing out and adjusting the feet
The 4 adjustable feet are used to level
the washer-dryer. The appliance is sup-
plied with all feet screwed in.
Using the open spanner supplied,
turn counter nut
2
in a clockwise dir-
ection. Then turn counter nut
2
to-
gether with foot
1
to unscrew.
Use a spirit level to check the
washer-dryer is standing level.
Hold foot
1
securely with a pipe
wrench. Turn counter nut
2
again us-
ing the open spanner supplied until it
sits firmly up against the casing.
Risk of damage from incorrectly
aligned washer-dryer.
There is a danger of the washer-
dryer moving about if the feet are not
secured.
Turn all 4 counter nuts for the feet
until they sit firmly up against the
casing. Please also check this for the
feet which did not need adjustment.