Miele TKG 450 WP Operating Instructions Manual Download Page 27

Page: 27 / 80

3. Selecting a programme and starting it

Selecting any Extras or Delay

start (if required)

Extras



Press any button.

The button will light up when the Extra

is selected.
An Extra can only be selected when the

load indication has gone out in the

display.
Not all Extras can be combined or can

be selected/deselected (see "Extras").

Please see "Extras" for further

information.

Delay start



Press the

Delay start

button to select

Delay start.

Please see "Delay start" for more

information.

Starting the programme



Press the flashing

Start/Stop

button.

The

Start/Stop

button will now light up

constantly.

Drying

and the programme duration will

light up in the display. When using

programmes with a selectable drying

level, the drying level reached will light

up later on instead of

Drying

The

Perfect Dry

indicator will only flash/

light up with programmes with

selectable drying levels (see also

"Operating the tumble dryer").

Cooling down

will light up in the display

shortly before the end of the

programme. The laundry will be cooled

down, however the programme is not

yet finished.

Summary of Contents for TKG 450 WP

















































































Search results

Summary of Contents for TKG 450 WP

Reviews:

Related manuals for TKG 450 WP

Brands by name

Popular brands

Miele TKG 450 WP, Operating Instructions Manual

Search results

Summary of Contents for TKG 450 WP

Reviews:

Related manuals for TKG 450 WP

Brands by name

Popular brands