Miele G 8066, Operating Instructions Manual

Page: 14 / 64

Before using the machine for the first
time, the following steps must be
carrried out.
Each step is described in more
detail in the appropriate section
further on in the booklet.
Prepare the water softener unit
(Optional).
The water softener unit must be set for
the water hardness level in your area.
The salt reservoir also has to be filled,
first
with water and then with
reactivation salt .
,
Inadvertently filling the salt
reservoir with cleaning agent always
leads to serious damage to the wa-
ter softener. Make sure you have
picked up the correct packet of
reactivation salt before filling the salt
reservoir!
Load the machine carefully
Arrange the load so that water will
come into contact with all surfaces.
Concealed surfaces will not be
cleaned.
The spray arms must not be blocked by
any items.
Only use cleaning agents formulated
for use in this type of machine.
Do not use cleaning agents designed
for domestic dishwashers.
Add cleaning agent
Follow the cleaning agent
manufacturer's recommendations on
dosage.
The amount required will depend on the
type of cleaning agent used and the
programme selected.
Read the notes on dosage given in
the programme chart.
Cleaning results may vary from brand
to brand. If you are not satisfied with
the results from one brand, try another
quality brand before contacting Miele
for advice.
The filter combination in the floor of
the wash cabinet and also the spray
arms must be kept clean.
It is therefore absolutely essential to
check and clean them regularly.
Before using for the first time
14