![background image](http://html.mh-extra.com/html/miele/g-8066/g-8066_operating-instructions-manual_234848032.webp)
For future servicing work, please
document any alterations to the stan-
dard factory settings.
Enter any alterations in the relevant
Value set:
box.
Altering the special function settings or
venting the dispensing system causes
the machine to drain automatically. It
will save both time and energy if you
carry out these procedures with an
empty tank.
1. Setting the DOS 1 cleaning
agent dosage concentration
level and venting the
dispensing system
(Programming level 2)
G 8066 and G 8066 WES:
Models G 8066 and G 8066 WES are
designed for use with powder cleaning
agents. Powder cleaning agent is
placed directly on the inside of the
door.
Models G 8066 and G 8066 WES can
also be connected to an optional DOS
Module G 60 if you wish to use liquid
cleaning agent.
In this case, you will need to
programme dispensing
Option 2
in
Programming level 2.
G 8066 DOS and G 8066 WES DOS:
Models G 8066 DOS and G 8066 WES
DOS are fitted with a built-in dispensing
pump and a reservoir for liquid
cleaning agent.
Option 1
needs to programmed in
Programming level 2.
A conversion kit is available for
connecting an external cleaning agent
container to the built-in cleaning agent
dispensing pump.
Option 3
needs to be programmed into
Programming level 2.
Programming special functions
32
Summary of Contents for G 8066
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...M Nr 06 743 480 00 en GB Alteration rights reserved 4205 ...