3.2 Setting the offset range for the
final rinse temperature
^
Call up Programming level 4
(see
3.1
).
Then, or if you were already in
Programming level 4, set the final rinse
temperature as follows:
^
Press the
z
button repeatedly until
4.02
appears in the display.
^
Press button
A
once. The current
offset range of the final rinse
temperature will appear in the
display, e.g.
20
. The factory default
setting is 20 °C (20).
This means that when the main wash
temperature is set at the factory default
of 65 °C, the final rinse temperature will
be 85 °C (i.e. 20°C higher).
^
Press the
A
button repeatedly until
the temperature you want appears.
The final rinse temperature should
be set approx. 20 °C higher than the
main wash temperature.
Proceed to step
3.4
if you do not want
to make any other changes to settings
in this programming level.
3.3 Selecting the final rinse duration
^
Call up Programming level 4
(see
3.1
).
Then, or if you were already in
Programming level 4, set the duration
for the final rinse as follows:
^
Press the
z
button repeatedly until
4.03
appears in the display.
^
Press button
A
once. The current
final rinse duration will appear in the
display, e.g.
60
. The display will
appear in tenths of a second. The
factory default setting is 6 seconds
(60).
Press
A
repeatedly or hold pressed in
until the required final rinse duration
appears in the display.
Proceed to step
3.4
if you do not want
to make any other changes to settings
in this programming level.
3.4 To save your changes
^
Press
6
.
SP
will appear in the
display.
^
Press
6
again. The alteration is now
saved.
^
Switch off the machine with the
Z
button.
Programming special functions
38
Summary of Contents for G 8066
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...M Nr 06 743 480 00 en GB Alteration rights reserved 4205 ...
