Miele G 8066, Operating Instructions Manual

Page: 47 / 64

Problem Possible cause Remedy
The wash cycle finishes
early and the
6
indicator light flashes
(fault code F..A appears
in the display).
Before rectifying the
problem you must:
– Switch off the machine
with the
Z
button.
The filters in the wash
cabinet are clogged. Clean the filters, see
"Cleaning and Care".
The drain pump or
non-return valve may be
blocked. Clean the drain pump and
the non-return valve, see
"Cleaning the drain pump
and non-return valve".
The drain hose is kinked. Remove any kink in the
drain hose.
Knocking noise in the
wash cabinet. The spray arm is knocking
against an item in the
basket. Interrupt the programme,
rearrange items which are
obstructing the spray
arms.
Rattling noise. Items of crockery are
insecure in the wash
cabinet. Interrupt the programme
and rearrange the items of
crockery.
Knocking noise in the
water pipes. This may be caused by
the on-site installation or
the cross-section of the
piping. This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
There are rust stains on
cutlery. The salt reservoir cap has
not been screwed on
correctly. Replace it making sure it
screws back on correctly.
The affected items are not
corrosion resistant. There is no remedy.
Purchase cutlery which is
dishwasher-proof.
Problem solving guide
47