Miele G 8066 Operating Instructions Manual Download Page 41

Page: 41 / 64

5.2 Altering the programme duration
for the STANDARD programme

Call up Programming level 6
(see

5.1

Then, or if you were already in
Programming level 6, set the
programme duration as follows:

Press the

button repeatedly until

6.02

appears in the display.

Press

once. The current

programme duration will appear in
the display, e.g.

120

. The factory

default setting is 120 seconds (120).

Press

repeatedly or hold pressed

in until the programme duration you
want appears in the display. The
duration is set in 5 s stages.

Proceed to step

5.4

if you do not want

to make any other changes to settings
in this programming level.

5.3 Altering the programme duration
for the INTENSIVE programme

Call up Programming level 6
(see

5.1

Then, or if you were already in
Programming level 6, set the
programme duration as follows:

Press the

button repeatedly until

6.03

appears in the display.

Press

once. The current

programme duration will appear in
the display, e.g.

180

. The factory

default setting is 180 seconds (180).

Press

repeatedly or hold pressed

in until the programme duration you
want appears in the display. The
duration is set in 5 s stages.

Proceed to step

5.4

if you do not want

to make any other changes to settings
in this programming level.

5.4 To save your changes

Press

will appear in the

display.

Press

again. The alteration is now

saved.

Switch off the machine with the

button.

Programming special functions

Summary of Contents for G 8066

































































Search results

Summary of Contents for G 8066

Reviews:

Related manuals for G 8066

Brands by name

Popular brands

Miele G 8066, Operating Instructions Manual

Search results

Summary of Contents for G 8066

Reviews:

Related manuals for G 8066

Brands by name

Popular brands