Miele G 8066, Operating Instructions Manual

Page: 20 / 64

Rinsing agent is necessary to ensure
water does not cling and leave marks
on items during the drying phase and
to help items dry faster after they have
been washed.
Rinsing agent is poured into the
storage reservoir and the amount set is
dispensed automatically in the final
rinse.
G 8066 and G 8066 WES:
These versions of the dishwasher are
fitted as standard with a built-in rinsing
agent dispensing pump.
The rinsing agent container holds
approx. 5 litres of rinsing agent and is
connected to the dishwasher by a
siphon tube.
^
Place the rinsing agent container on
the floor beside the dishwasher, in a
neighbouring unit or on a wall
bracket (available from the Miele
Spare Parts Department).
Add rinsing agent indicator H
The rinsing agent container must be
refilled when the Add rinsing agent
indicator light
H on the control panel
comes on.
^
Fill the container with rinsing agent or
replace it with a new one.
^
Insert the siphon tube in the opening
at the top of the container and push it
down until it touches the bottom of
the container. Then screw it on
securely. Make sure you follow the
colour code.
Adding rinsing agent
20