Miele G 8066 Operating Instructions Manual Download Page 19

Page: 19 / 64

Rinsing out salt residues at the end
of operation

Press the

button.

Press and hold the

button and

press

at the same time.

The rinsing process will begin which
will dilute and rinse out any residual
salt.

– The indicator light for the Start button

will come on.

– The indicator light for the DRAIN

programme button will also come on.

– The time until the end of the rinsing

process will appear in the display.

At the end of the rinsing process

– The indicator light for the Start button

will go out.

– The indicator light for the DRAIN

programme button will come on.

–

will appear in the display.

The machine can now be switched off.

If you open the door before switching
the machine off, all the programme
buttons will light up, and you can select
a programme.

Salt indicator

The reactivation salt needs to be
replenished when the

indicator lights

up.

The water softener reactivates
automatically.

The

indicator remains lit during the

reactivation process.

Water softener unit (optional)

Summary of Contents for G 8066

































































Search results

Summary of Contents for G 8066

Reviews:

Related manuals for G 8066

Brands by name

Popular brands

Miele G 8066, Operating Instructions Manual

Search results

Summary of Contents for G 8066

Reviews:

Related manuals for G 8066

Brands by name

Popular brands