Miele G 8066, Operating Instructions Manual

Page: 45 / 64

E-Cloth
^
A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
Cleaning the control panel
^
This should only be cleaned with a
damp cloth or a suitable cleaner for
use on plastic materials, or with a
disinfectant tested and recognised
as suitable for this use.
,
Do not use abrasive cleaners,
glass cleaners or all-purpose
cleaners.
Because of their chemical
composition they could cause
serious damage to plastic
components.
Cleaning the front of the
machine
^
Clean using a proprietary cleaning
agent designed for the type of front
the machine is fitted with.
,
Do not use cleaning agents
containing ammonia or thinners.
Cleaning the spray arms
Waste particles can lodge in the spray
arm jets.
It is therefore important to inspect the
spray arms regularly (at least every six
months).
^
Use a sharp pointed object to push
particles into the spray arm jets, and
rinse well under running water.
Remove the spray arms as follows:
^
Unscrew the upper spray arm.
^
First remove the bottom basket and
then pull the
lower spray arm off.
Particles in the lower spray arm are
easier to rinse out if the caps are
opened first of all.
^
Open the caps in the direction of the
arrow. After cleaning screw them in
again securely.
Important:
After replacing the spray arms, check
that they rotate freely.
Cleaning and care
45