Settings
44
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault, as long as the buzzer has been
activated.
Buzzer in the event of a fault
In the event of a fault, the alarm tone
will sound 4 times at intervals with a
short pause between each set of tones.
The alarm tone that sounds when
there is a fault cannot be
deactivated.
Buzzer
The buzzer at the end of a program will
sound 4 times at intervals with a short
pause between each set of tones.
The volume of the buzzer at the end of
the program can be selected from one
of 7 levels. If no volume is selected, the
audible signals are turned off.
Keypad tone
An audible tone sounds each time a
sensor button outside of the touch
display is pressed.
The volume for the keypad tone can be
set to one of 7 different settings. If no
volume is selected, the keypad tone is
turned off (except the
On / Off
sensor
button).
Welcome melody
If you turn the dishwasher on or off, a
brief melody will sound.
You can turn the melody off.
Memory
When the
Memory
function is switched
on, the most recently started program is
saved.
When you switch the dishwasher off
and back on again after the end of a
program, the last program started will
be selected. This may increase energy
consumption.
Refill indicators
If you only ever use combination
detergent products or automatic
dispensing using Miele PowerDisks (if
available), you can turn off the refill
reminders for reactivation salt and rinse
aid if you wish.
Please make sure that if you stop
using combination detergents, you
refill the reactivation salt and rinse
aid. Switch the refill reminders back
on.
Summary of Contents for G 7966
Page 5: ...Contents 5 Electrical connection 118 Sound emission testing 120 ...
Page 122: ......
Page 124: ...M Nr 11 859 220 00 en CA G 7966 ...
