Miele G 7966 Operating Instructions Manual Download Page 23

Page: 23 / 124

Initial commissioning

Door opening aid

If the door will not open when knocked
or if there is a power failure, the door
can be opened manually with the door
opening aid supplied with the
dishwasher.



Push the door opening aid into the
gap between the dishwasher front
and the neighbouring unit door



about 5 7/8" (15 cm) below the
countertop.



Turn the door opening aid clockwise



until it engages behind the

dishwasher front.



Then use it to pull the door open.

Closing the door



Push the baskets in.



Push the door until it clicks shut.

The door will then close automatically.



Risk of crushing due to the door

closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands