Miele G 7966 Operating Instructions Manual Download Page 25

Page: 25 / 124

Initial commissioning

Basic settings

Switching on the dishwasher



Open the door.



Turn the dishwasher on using the



sensor button.

The welcome screen will appear when
the dishwasher is turned on and the
welcome melody will sound.

For further information about the
display functionality, see “Display
functions” under “Guide to the
appliance”.

Setting the language

The display will change automatically to
the screen for setting the language.



Select the language you want as well
as the country if applicable.

For further information on setting the
language, see “Language” under
“Settings”.

The set language is marked orange.

Setting up Miele@home

The message

Activate Miele@home?

will

appear on the display.



If you want to set up Miele@home
now, select the

Yes

option.

Useful tip:

To postpone setup until

later, select the

option.

There are 2 ways of connecting your
dishwasher to your WiFi network:



Select the connection method you
wish to use.

App

WPS

You will then be guided by the display
and the Miele app.

For further information on
Miele@home, see “Miele@home”
under “Settings”.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands