Miele G 7966 Operating Instructions Manual Download Page 37

Page: 37 / 124

Settings

App

The Miele app is available to download
free of charge from the Apple App
Store

or from the Google Play Store™.



Select the

App

menu option and

confirm with



Follow the instructions in the app.

Once your dishwasher is connected to
your WiFi network, you can use the app
to carry out the following tasks:

- Control your dishwasher remotely.

- Call up information on the operating

status of your dishwasher.

- Call up information on the program

sequence of your dishwasher.

- Set up a Miele@home network with

other WiFi-enabled Miele appliances.

WPS

As an alternative to networking via the
Miele app, you can connect your
dishwasher to your WiFi network using
WPS (Wireless Protected Setup).

Your WiFi router must support WPS.



Confirm the message

Press the WPS

button on your router

with



Activate the WPS function on your
router within 2 minutes.



Once the connection has been
established, confirm the message
with

If the connection fails, you have
probably not activated WPS on your
router quickly enough. Repeat the steps
above.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands