Miele G 7966 Operating Instructions Manual Download Page 97

Page: 97 / 124

Frequently Asked Questions

Fault messages

Problem

Possible cause and solution

The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
One of the following
fault messages is
displayed:

Before remedying the fault:



Switch the dishwasher off.



Fault F: Technical fault.

Switch the appliance off and
back on again. Read the
Operating Instructions for
additional details.

There may be a technical fault.



Turn the dishwasher back on after a few seconds.



Select the program you want to use.



Close the door.

If the fault message appears again, there is a
technical fault.



Turn the dishwasher off.



Close the faucet.



Contact Miele Service.



Waterproof fault. Turn

the appliance off, close the
water supply and contact
Miele Service.

The Waterproof system has reacted.



Switch the dishwasher off.



Turn off the water supply.



Contact Miele Service.



Fault F 78: A technical

fault has occcurred. Turn off
the appliance, close the
water supply and contact
Miele Service.

Circulation pump fault.



Switch the dishwasher off.



Switch the dishwasher back on.



Select the desired program.



Close the door.

If the fault message appears again, there is a
technical fault.



Switch the dishwasher off.



Turn off the water supply.



Contact Miele Service.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands