![background image](http://html.mh-extra.com/html/miele/g-7966/g-7966_operating-instructions-manual_234841027.webp)
Initial commissioning
27
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Automatic
dispensing / AutoDos” under
“Detergent”).
Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first program (see
“Activating AutoDos” under
“Detergent”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Manual detergent dispensing” under
“Detergent”).
Select the setting you want and
confirm with
OK
.
This setting applies to all programs and
you can change it in a program’s Extra
options menu.
Finally, prompts will appear in the
display.
After confirming these prompts with
OK
, the messages
Refill salt and start
the “QuickIntenseWash” program with the
“Express” option without a load
and
Refill rinse aid
may appear.
Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Initial commissioning”).
Select
OK
to confirm the messages.
The selected program will be shown
briefly in the display.
The display will then show the
estimated program cycle time for the
program selected.
Summary of Contents for G 7966
Page 5: ...Contents 5 Electrical connection 118 Sound emission testing 120 ...
Page 122: ......
Page 124: ...M Nr 11 859 220 00 en CA G 7966 ...