Miele G 7966 Operating Instructions Manual Download Page 74

Page: 74 / 124

Options

Setting “Start at”

With the

Start at

function, you set the

exact time at which you want the
program to start.



Set the hours with the



sensor

buttons.



Touch the minute number block.



Use the



sensor buttons to enter

the minutes and confirm your entry
with

The saved start time for the selected
program will appear in the display for
several minutes.



Close the door.

When the set time is reached, the
program selected will begin
automatically.

Setting “Finish at”

Use the

Finish at

function to set the

latest time by which the program
selected has to be finished.



Set the hours with the



sensor

buttons.



Touch the minute number block.



Use the



sensor buttons to enter

the minutes and confirm your entry
with

The estimated start time for the
selected program will appear in the
display for several minutes.

A message will appear in the display if
the program cannot be completed by
the set finish time because it has too
long a cycle time.



If it appears, confirm the message
with



Close the door.

The program will start automatically
when the estimated start time is
reached.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands