Miele G 7966 Operating Instructions Manual Download Page 68

Page: 68 / 124

Operation

Switching on the dishwasher



Turn on the water supply if it is turned
off.



Open the door.



Make sure the spray arms can rotate
freely.



Touch the



sensor button.

If the dishwasher has been turned off
for longer than 1 minute, you will
need to hold the



sensor button for

a bit longer (wipe protection).

The Programs menu will appear in the
display.

Selecting a program

Choose your program according to the
type of load and the degree of soiling.

The different programs and their uses
are described under “Program
overview”.



Select the program you want in the
display.

The display will change to the Extra
options menu.

You can now select the extra options
(see “Extra options”).

To select a different program, touch the

Back

sensor button to return to the

Programs menu.

If you want to control the dishwasher
remotely using the Miele@mobile app,
you will first need to activate the
“Remote start” option (see “Activate
Remote start” under “Options”).



Close the door within 4 seconds.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands