Miele G 7966 Operating Instructions Manual Download Page 42

Page: 42 / 124

Settings

Setting the electricity rate times

Before you can use the

EcoStart

option,

you must set at least one electricity rate
time.



Select an electricity rate time from
R1–R3 to set.

The start of the electricity rate time
selected will be displayed.



Set the hours and minutes for the
start time.



Select

End

The end of the electricity rate time
selected will be displayed.



Set the hour and minutes for the
finish time and confirm both with

The electricity rate time will be saved.

You can now select the priority of the
saved electricity rate time.



Select the priority you want.

The selected settings are displayed.

The electricity rate time will be
activated.

Changing the electricity rate times

You can change the start, finish, or
priority of an electricity rate time.



Select an electricity rate time from
R1–R3 to change.



Select the setting you want to
change.



Change the setting and confirm with

The selected settings are displayed.

The change will be saved.

Summary of Contents for G 7966





























































































































Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands

Miele G 7966, Operating Instructions Manual

Search results

Summary of Contents for G 7966

Reviews:

Related manuals for G 7966

Brands by name

Popular brands